Denkena, B.; Krödel, A.; Lang, R.: Fabrication and use of Cu-Cr-diamond composites for the application in deep feed grinding of tungsten carbide. In: Diamond and Related Materials 120 (2021), 108668. DOI:
https://doi.org/10.1016/j.diamond.2021.108668
Zusammenfassung: |
Machining of tungsten carbide requires the use of highly wear resistant grinding tools, like metal bonded grinding tools. The abrasive layer of these grinding tools can be regarded as Metal-Matrix-Composites reinforced with diamond particles. Copper-Matrix-Composites already are being used as heat sink materials through their outstanding high thermal conductivity. In this work, Cu/Diamond composites with 50 vol% diamond have been fabricated through field assisted sintering and the application of these composites as grinding layers in a deep feed grinding process of tungsten carbide was investigated. Through addition of chromium powder as a carbide former on the surface of the diamond particles, the critical bond strength and therefore the diamond grain retention was significantly increased by +363%. The addition of 2 wt% chromium to the copper matrix also resulted in a +84% increase of thermal conductivity relatively to the chromium free Cu/Diamond composite. Grinding of tungsten carbide as a dynamic stress test showed that the increased grain retention and thermal conductivity resulted in a decrease in grinding layer wear. Further chromium addition to 8 wt% chromium resulted in a decrease in thermal conductivity and the formation of adhesive cloggings on the grinding wheel surface during grinding.
|
Lizenzbestimmungen: |
CC BY-NC-ND 4.0 Unported - https://creativecommons.org/licenses/by-nc-nd/4.0/
|
Publikationstyp: |
Article |
Publikationsstatus: |
publishedVersion |
Erstveröffentlichung: |
2021 |
Schlagwörter (englisch): |
Abrasion, Carbides, Composites, Cutting tools, High pressure high temperature (HTHP), Interface characterization, Mechanical properties characterization, Synthetic diamond, Thermal properties, Wear
|
Fachliche Zuordnung (DDC): |
550 | Geowissenschaften, 670 | Industrielle und handwerkliche Fertigung
|